Halvleder enhed Forsegling Test Utæthed Detect MDNY-YHYD160 Tryk Helium Fluorolieudstyr , Kina Halvleder enhed Forsegling Test Utæthed Detect MDNY-YHYD160 Tryk Helium Fluorolieudstyr Producenter, leverandører, fabrik Denne forordning træder i kraft dagen efter offentliggørelsen i Den Europæiske Unions Tidende.

Produkt beskrivelse

MDNY-YHYD160 Pressure Helium Fluorine Oil equipment

MDNY-YHYD160 is an automated leak detection device specifically designed for fine and coarse inspection of electronic components such as semiconductor devices, integrated circuits, and electronic products.
The device is equipped with a PLC (Programmable Logic Controller), which can automatically control and operate the entire leak detection process, effectively preventing misoperation and improving leak detection efficiency.
And a photoelectric detection device is installed on the nitrogen tank of the equipment, which can monitor the oil level inside the nitrogen tank at any time.
This device has a high degree of automation and high reliability.
It can be used in conjunction with helium mass spectrometer leak detector and heavy fluorine oil heater to perform the entire fine and coarse inspection process of electronic components.

The MDNY-YHYD160 helium fluorine oil pressurization instrument, when combined with a heavy fluorine oil heating instrument and a helium mass spectrometer leak detector, can easily complete the leak detection requirements for electronic and semiconductor devices specified in GJB36A-96, GJB548-96A, and GJB128A-97 standards.

product semiconductor device sealing test leak detect mdny yhyd160 pressure helium fluorine oil equipment-47

Principbeskrivelse

product semiconductor device sealing test leak detect mdny yhyd160 pressure helium fluorine oil equipment-48

Feature:

PLC control, touch screen operation; Automatic control of liquid level height and display of process status;
Helium and fluorine oil are separated and operated independently, flexible and non interfering with each other;
Valves, pipelines, flanges, pressure tanks, and oil storage tanks are made of stainless steel;
The oil filter tank can filter out solid particles of 1 μ m, ensuring the cleanliness of fluorine oil.

Specification

Main technical functions:

Funktion	Beskriv	Noter
Visningstilstand	Touch screen
Kontroltilstand	PLC
Mechanical pump pumping speed	4L / s	Bipolar rotary vane vacuum pump
Dimensions of pressurized helium/pressurized fluorine oil tanks	F150×200（mm）	Størrelse, der kan tilpasses
vakuum grad	≤45 Pa
Helium filling pressure	0.2-0.6Mpa, adjustable
Trykholdetid	1-10 hours, adjustable

Konfiguration

Navn	Beskriv	Antal
Mechanical pump	4L / s	1 styk
Pressurized helium tank	F150×200（mm）	1 styk
Fluorine pressurized oil tank	F150×200（mm）	1 styk
Opbevaringstank	F215×250mm	1 styk
Magnetventil	CKD/ASCO	1 sæt
tryksensor	Måling	1 sæt
Liquid level meter	HOARE	1 sæt
rørsystem	HOARE	1 sæt
Elektrisk styresystem	HOARE	1 sæt
Light fluorine oil (optional)	Minder-Hightech	1 drum (20KG)

product semiconductor device sealing test leak detect mdny yhyd160 pressure helium fluorine oil equipment-49

Feature:

The container has a certain depth to ensure that the distance between the inspected item and the liquid surface after immersion is greater than 50mm;
The inner surface has a non reflective black background; Equipped with a 3x magnifying glass and adjustable angle;
The light source installed on the instrument is sufficient and emits parallel light;
The illuminance inside the instrument is greater than 1.61 × 105lX, and the light source has no strong incident or reflected light on the observer;
The heating temperature is controllable and adjustable, and the time for placing leak detection reminders can be set.

Forklaring:

stipulates that particles larger than 1 μm are not allowed in high boiling point fluorine oil (FC43). However, in actual leak detection, due to the influence of the tested object and environmental factors, some impurities will gradually
accumulate in the oil, increasing the turbidity of the fluorine oil and making it difficult to observe. Therefore, heavy fluorine
oil should be filtered regularly, and the heavy fluorine oil container is equipped with a drain port, which can conveniently store heavy fluorine oil. Heavy fluorine oil can be stored in a pot after natural cooling to reduce waste caused by natural
volatilization.

Indikator funktion:

Arbejdstemperaturområde	125 ℃ ± 5 ℃
opvarmningshastighed	Heat from room temperature to 125 ℃ ≤30 minutes
Beholderstørrelse	240165180 mm（BDH）
Observation window size	200 * 135mm
Observation window function	Equipped with an adjustable angle magnifying glass
Leak detection time setting	Can set timed alarms
Dræn olien af	The container is equipped with an oil discharge port
Filtering function (optional)	It has a circulating filtration function that can filter out 1μm impurities in heavy fluorine oil

Konfiguration:

Navn	Beskriv	Antal
Olievarmesystem	/	1 sæt
Elektrisk styredel	/	1 sæt
Heavy fluorine oil container	/	1
lup	Adjustable angle, 3x	1
Lys pære:	/	2
Retrieval device	1 size each	2
Heavy fluorine oil (optional)	importere	5Kg

Pakning og levering

product semiconductor device sealing test leak detect mdny yhyd160 pressure helium fluorine oil equipment-50

product semiconductor device sealing test leak detect mdny yhyd160 pressure helium fluorine oil equipment-51

For bedre at sikre sikkerheden af dine varer vil der blive leveret professionelle, miljøvenlige, bekvemme og effektive emballeringstjenester.

Firma profil

Minder-Hightech er salgs- og servicerepræsentant inden for halvleder- og elektronisk produktindustriudstyr. Virksomheden er forpligtet til at give kunderne overlegne, pålidelige og one-stop-løsninger til maskinudstyr.

FAQ

1. Om pris:
Alle vores priser er konkurrencedygtige og til forhandling. Prisen varierer afhængigt af konfigurationen og tilpasningskompleksiteten af din enhed.

2. Om prøve:
Vi kan levere prøveproduktionstjenester til dig, men du kan give nogle gebyrer.

3. Om betaling:
Når planen er bekræftet, skal du først betale os et depositum, og fabrikken vil begynde at forberede varerne. Efter
udstyr er klar og du betaler restbeløbet, så sender vi det.

4. Om levering:
Efter at udstyrsfremstillingen er afsluttet, sender vi dig acceptvideoen, og du kan også komme til stedet for at inspicere udstyret.

5. Installation og fejlretning:
Når udstyret ankommer til din fabrik, kan vi sende ingeniører til at installere og fejlfinde udstyret. Vi giver dig et særskilt tilbud på dette servicegebyr.

6. Om garanti:
Vores udstyr har 12 måneders garantiperiode. Hvis nogen dele efter garantiperioden er beskadiget og skal udskiftes, opkræver vi kun kostprisen.