Pooljuht seadme tihendamise katse lekke tuvastamine MDNY-YHYD160 Rõhk heeliumfluoriõli seadmed , Hiina Pooljuht seadme tihendamise katse lekke tuvastamine MDNY-YHYD160 Rõhk heeliumfluoriõli seadmed Tootjad, Tarnijad, Tehas

Tootekirjeldus

MDNY-YHYD160 Pressure Helium Fluorine Oil equipment

MDNY-YHYD160 is an automated leak detection device specifically designed for fine and coarse inspection of electronic components such as semiconductor devices, integrated circuits, and electronic products.
The device is equipped with a PLC (Programmable Logic Controller), which can automatically control and operate the entire leak detection process, effectively preventing misoperation and improving leak detection efficiency.
And a photoelectric detection device is installed on the nitrogen tank of the equipment, which can monitor the oil level inside the nitrogen tank at any time.
This device has a high degree of automation and high reliability.
It can be used in conjunction with helium mass spectrometer leak detector and heavy fluorine oil heater to perform the entire fine and coarse inspection process of electronic components.

The MDNY-YHYD160 helium fluorine oil pressurization instrument, when combined with a heavy fluorine oil heating instrument and a helium mass spectrometer leak detector, can easily complete the leak detection requirements for electronic and semiconductor devices specified in GJB36A-96, GJB548-96A, and GJB128A-97 standards.

product semiconductor device sealing test leak detect mdny yhyd160 pressure helium fluorine oil equipment-47

Põhimõtte kirjeldus

product semiconductor device sealing test leak detect mdny yhyd160 pressure helium fluorine oil equipment-48

Motiiv:

PLC control, touch screen operation; Automatic control of liquid level height and display of process status;
Helium and fluorine oil are separated and operated independently, flexible and non interfering with each other;
Valves, pipelines, flanges, pressure tanks, and oil storage tanks are made of stainless steel;
The oil filter tank can filter out solid particles of 1 μ m, ensuring the cleanliness of fluorine oil.

spetsifikatsioon

Main technical functions:

funktsioon	Kirjeldama	märkused
Kuvarežiim	Puuteekraan
Juhtimisrežiim	PLC
Mechanical pump pumping speed	4L / s	Bipolar rotary vane vacuum pump
Dimensions of pressurized helium/pressurized fluorine oil tanks	F150×200（mm）	Kohandatav suurus
vaakum kraad	≤45Pa
Helium filling pressure	0.2-0.6Mpa, adjustable
Surve hoidmise aeg	1-10 hours, adjustable

konfiguratsioon

Nimi	Kirjeldama	Kogus
Mehaaniline pump	4L / s	1 tükk
Pressurized helium tank	F150×200（mm）	1 tükk
Fluorine pressurized oil tank	F150×200（mm）	1 tükk
Mahuti	F215×250mm	1 tükk
Solenoidklapp	CKD/ASCO	1 komplekt
Surveandur	Mõõdud	1 komplekt
Liquid level meter	HOARE	1 komplekt
torustik	HOARE	1 komplekt
Elektriline juhtimissüsteem	HOARE	1 komplekt
Light fluorine oil (optional)	Minder-Higtech	1 drum (20KG)

product semiconductor device sealing test leak detect mdny yhyd160 pressure helium fluorine oil equipment-49

Motiiv:

The container has a certain depth to ensure that the distance between the inspected item and the liquid surface after immersion is greater than 50mm;
The inner surface has a non reflective black background; Equipped with a 3x magnifying glass and adjustable angle;
The light source installed on the instrument is sufficient and emits parallel light;
The illuminance inside the instrument is greater than 1.61 × 105lX, and the light source has no strong incident or reflected light on the observer;
The heating temperature is controllable and adjustable, and the time for placing leak detection reminders can be set.

Selgitus:

stipulates that particles larger than 1 μm are not allowed in high boiling point fluorine oil (FC43). However, in actual leak detection, due to the influence of the tested object and environmental factors, some impurities will gradually
accumulate in the oil, increasing the turbidity of the fluorine oil and making it difficult to observe. Therefore, heavy fluorine
oil should be filtered regularly, and the heavy fluorine oil container is equipped with a drain port, which can conveniently store heavy fluorine oil. Heavy fluorine oil can be stored in a pot after natural cooling to reduce waste caused by natural
volatilization.

Indikaatori funktsioon:

Töötemperatuuri vahemik	125 ℃ ± 5 ℃
küttekiirus	Heat from room temperature to 125 ℃ ≤30 minutes
Mahuti suurus	240165180mm (LSK)
Observation window size	200 * 135mm
Observation window function	Equipped with an adjustable angle magnifying glass
Leak detection time setting	Can set timed alarms
Kurna õli	The container is equipped with an oil discharge port
Filtering function (optional)	It has a circulating filtration function that can filter out 1μm impurities in heavy fluorine oil

Konfiguratsioon:

Nimi	Kirjeldama	Kogus
Õliküttesüsteem	/	1 komplekt
Elektriline juhtosa	/	1 komplekt
Heavy fluorine oil container	/	1
luup	Adjustable angle, 3x	1
Lambipirn:	/	2
Retrieval device	1 size each	2
Heavy fluorine oil (optional)	import	5Kg

Pakkimine ja kohaletoimetamine

product semiconductor device sealing test leak detect mdny yhyd160 pressure helium fluorine oil equipment-50

product semiconductor device sealing test leak detect mdny yhyd160 pressure helium fluorine oil equipment-51

Oma kaupade ohutuse paremaks tagamiseks pakutakse professionaalseid, keskkonnasõbralikke, mugavaid ja tõhusaid pakendamisteenuseid.

Firmast

Minder-Hightech on pooljuht- ja elektroonikatööstuse seadmete müügi- ja teenindusesindaja. Ettevõte on pühendunud pakkuma klientidele suurepäraseid, usaldusväärseid ja ühekordseid lahendusi masinate jaoks.

FAQ

1. Hind:
Kõik meie hinnad on konkurentsivõimelised ja läbiräägitavad. Hind sõltub teie seadme konfiguratsioonist ja kohandamise keerukusest.

2. Näidise kohta:
Saame teile pakkuda näidistootmisteenuseid, kuid võite maksta mõningaid tasusid.

3. Teave makse kohta:
Pärast plaani kinnitamist peate esmalt tasuma meile tagatisraha ja tehas hakkab kaupa ette valmistama. Pärast
seadmed on valmis ja maksate saldo, me saadame selle.

4. Teave kohaletoimetamise kohta:
Pärast seadmete valmistamise lõpetamist saadame teile vastuvõtuvideo ning võite tulla ka objektile seadmeid üle vaatama.

5. Installimine ja silumine:
Kui seadmed teie tehasesse jõuavad, saame saata insenerid seadmete paigaldamiseks ja silumiseks. Teeme teile selle teenustasu kohta eraldi hinnapakkumise.

6. Garantii kohta:
Meie seadmetel on 12-kuuline garantiiaeg. Garantiiperioodi lõppedes, kui mõni osa on kahjustatud ja vajab väljavahetamist, võtame ainult omahinna.