Puolijohdepiirit Sähköiset tuotteet Vuoto Detektorin Helium fluoriöljy Laitteet He & Fluorin lataus Alustan , Kiina Puolijohdepiirit Sähköiset tuotteet Vuoto Detektorin Helium fluoriöljy Laitteet He & Fluorin lataus Alustan Valmistajat, toimittajat, Tehdas

Tuotteen Kuvaus

He & Fluorine Charge Platform

Our company's MDNY-YAYD160 series helium/fluorine oil pressure equipment, combined with helium mass spectrometer leak detector and heavy fluorine oil heating leak detector, is an automated helium/fluorine oil pressure equipment designed for fine and coarse inspection of electronic components such as integrated circuits, semiconductor devices, and electronic products.
Fluorine oil/helium gas has excellent dielectric properties, chemical inertness, electrical insulation, and high and low
temperature resistance. It is non corrosive to electronic components and does not affect their various parameters. Make it an ideal leak detection medium for electronic component leak testing.
The principle of helium pressurization fine inspection: First, place the original device in a sealed container that can be
pressurized, and pressurize the component with helium for a certain period of time. If there is a leak in the component, helium gas is forced into the inner cavity. Then remove the tested component and place it in the detection box of the helium mass spectrometer leak detector for vacuum leak detection. If there is a leak in the component, the helium gas entering its inner cavity will overflow into the leak detector, and the leak detector will display the leakage rate.
The principle of fluorine oil leak detection method is that the molecules of the leak detection medium are small, so even small leaks can pass through. If there are leaks in the device, light fluorine oil/helium gas will enter the device under pressure during pressurization. Due to the boiling point temperature of light fluorine oil being about 45.7 ℃, when placed in heavy fluorine oil at a temperature of 125 ℃, the light fluorine oil quickly vaporizes, causing a rapid increase in pressure inside the component cavity. The gas inside the cavity will emerge from the leak, resulting in the appearance of bubbles in high boiling fluorine oil.
All valve bodies of this equipment are controlled by electric ball valves, which can be operated with one click through a PLC based control system. And equipped with a touch screen, it can constantly observe the pressure and liquid level inside the pressurized fluorine oil/helium tank.
This device has a compact overall structure, is easy to move, is easy to operate, has high detection efficiency, and is long-term safe and reliable. The appearance of the equipment is shown in the diagram:

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-56

määrittely

Jännite / teho	220V / 1100W
Työpaine	600kpa ± 20kpa
Fluorine oil tank capacity	8.5L
Fluorine/helium tank capacity	12 L
Mitat	1080 * 720 * 1422mm (length * width * height)
Laitteen paino	230KG

Laitteen yleinen rakenne

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-57

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-58

Sähköinen käyttöliittymä:

On the left side of the device is the circuit part, which is distributed in sequence with the main power socket, grounding pole, and main power switch. On the right side of the equipment is the gas path section, which is sequentially distributed with helium interface, nitrogen interface, and exhaust interface. After the device is in place, plug in the corresponding power connector and connect the corresponding air circuit as shown in the figure.

Pressure helium/fluorine oil tank:

The overall material is made of stainless steel, with four locking mechanisms evenly distributed on the main body of the can. The can lid is welded with a stainless steel handle, making it easy for people to flip the lid. When the lid is flipped over, it can be kept at a safe angle. Before pressurizing helium/fluorine oil, use a locking mechanism to lock the tank cover. The top of the locking mechanism is equipped with a five-star handle nut for easy locking by people.

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-59

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-60

Fluorine oil tank

The main body of the tank is made of stainless steel material, and the bottom is equipped with an oil drain valve. After using the fluorine oil in the tank for a period of time, the drain valve can be opened to discharge the fluorine oil from the tank, and then the fluorine oil can be filtered and re injected. (Fluorine oil can be injected from the pressurized helium/fluorine oil tank above)

Järjestelmän tila -liitäntä

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-61

Pakkaus ja toimitus

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-62

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-63

Yrityksen profiili

Minder-Hightech on puolijohde- ja elektroniikkateollisuuden laitteiden myynti- ja huoltoedustaja. Yritys on sitoutunut tarjoamaan asiakkaille ensiluokkaisia, luotettavia ja yhden luukun ratkaisuja koneisiin.

FAQ

1. Tietoja hinnasta:
Kaikki hinnat ovat kilpailukykyisiä ja neuvoteltavissa. Hinta vaihtelee laitteesi kokoonpanon ja mukauttamisen monimutkaisuuden mukaan.

2. Tietoja näytteestä:
Voimme tarjota sinulle näytetuotantopalveluita, mutta saatat periä joitain maksuja.

3. Tietoja maksusta:
Kun suunnitelma on vahvistettu, sinun on ensin maksettava meille talletus, ja tehdas alkaa valmistaa tavaroita. jälkeen
laite on valmis ja maksat loppusumman, lähetämme sen.

4. Tietoja toimituksesta:
Kun laitevalmistus on valmis, lähetämme sinulle hyväksymisvideon, ja voit myös tulla paikalle tarkastamaan laitteet.

5. Asennus ja virheenkorjaus:
Kun laitteet saapuvat tehtaallesi, voimme lähettää insinöörejä asentamaan ja korjaamaan laitteet. Teemme sinulle erillisen tarjouksen tästä palvelumaksusta.

6. Tietoja takuusta:
Laitteillamme on 12 kuukauden takuu. Takuuajan jälkeen, jos jotkin osat ovat vaurioituneet ja ne on vaihdettava, veloitamme vain omakustannushinnan.