Guangzhou Minder-Hightech Co.,Ltd.
EN
Guangzhou Minder-Hightech Co.,Ltd.
Get Quote

Guangzhou Minder-Hightech Co.,Ltd.

Home
About Us
MH Equipment
Solution
Oversea Users
Video
Contact Us
Home> Semicon Inspect
  • Semiconductor Device Sealing Test Leak Detect MDNY-YHYD160 Pressure Helium Fluorine Oil Equipment
  • Semiconductor Device Sealing Test Leak Detect MDNY-YHYD160 Pressure Helium Fluorine Oil Equipment
  • Semiconductor Device Sealing Test Leak Detect MDNY-YHYD160 Pressure Helium Fluorine Oil Equipment
  • Semiconductor Device Sealing Test Leak Detect MDNY-YHYD160 Pressure Helium Fluorine Oil Equipment

Semiconductor Device Sealing Test Leak Detect MDNY-YHYD160 Pressure Helium Fluorine Oil Equipment

Get a Free Quote
Product Description

MDNY-YHYD160 Pressure Helium Fluorine Oil equipment

MDNY-YHYD160 is an automated leak detection device specifically designed for fine and coarse inspection of electronic components such as semiconductor devices, integrated circuits, and electronic products.
The device is equipped with a PLC (Programmable Logic Controller), which can automatically control and operate the entire leak detection process, effectively preventing misoperation and improving leak detection efficiency.
And a photoelectric detection device is installed on the nitrogen tank of the equipment, which can monitor the oil level inside the nitrogen tank at any time.
This device has a high degree of automation and high reliability.
It can be used in conjunction with helium mass spectrometer leak detector and heavy fluorine oil heater to perform the entire fine and coarse inspection process of electronic components.
The MDNY-YHYD160 helium fluorine oil pressurization instrument, when combined with a heavy fluorine oil heating instrument and a helium mass spectrometer leak detector, can easily complete the leak detection requirements for electronic and semiconductor devices specified in GJB36A-96, GJB548-96A, and GJB128A-97 standards.

Principle Description

Feature:

PLC control, touch screen operation; Automatic control of liquid level height and display of process status;
Helium and fluorine oil are separated and operated independently, flexible and non interfering with each other;
Valves, pipelines, flanges, pressure tanks, and oil storage tanks are made of stainless steel;
The oil filter tank can filter out solid particles of 1 μ m, ensuring the cleanliness of fluorine oil.
Specification
Main technical functions:
Function
Describe
Notes
Display mode
Touch screen
Control mode
PLC
Mechanical pump pumping speed
4L/s
Bipolar rotary vane vacuum pump
Dimensions of pressurized helium/pressurized fluorine oil tanks
F150×200（mm）
Customizable size
vacuum degree
≤45Pa
Helium filling pressure
0.2-0.6Mpa, adjustable
Pressure holding time
1-10 hours, adjustable
Configuration
Name
Describe
Quantity
Mechanical pump
4L/s
1 piece
Pressurized helium tank
F150×200（mm）
1 piece
Fluorine pressurized oil tank
F150×200（mm）
1 piece
Storage tank
F215×250mm
1 piece
Solenoid valve
CKD/ASCO
1 set
Pressure sensor
Meas
1 set
Liquid level meter
HOARE
1 set
piping
HOARE
1 set
Electric control system
HOARE
1 set
Light fluorine oil (optional)
Minder-Hightech
1 drum (20KG)

Feature:

The container has a certain depth to ensure that the distance between the inspected item and the liquid surface after immersion is greater than 50mm;
The inner surface has a non reflective black background; Equipped with a 3x magnifying glass and adjustable angle;
The light source installed on the instrument is sufficient and emits parallel light;
The illuminance inside the instrument is greater than 1.61 × 105lX, and the light source has no strong incident or reflected light on the observer;
The heating temperature is controllable and adjustable, and the time for placing leak detection reminders can be set.

Explanation:

stipulates that particles larger than 1 μm are not allowed in high boiling point fluorine oil (FC43). However, in actual leak detection, due to the influence of the tested object and environmental factors, some impurities will gradually
accumulate in the oil, increasing the turbidity of the fluorine oil and making it difficult to observe. Therefore, heavy fluorine
oil should be filtered regularly, and the heavy fluorine oil container is equipped with a drain port, which can conveniently store heavy fluorine oil. Heavy fluorine oil can be stored in a pot after natural cooling to reduce waste caused by natural
volatilization.
Indicator function:
Working temperature range
125℃±5℃
heating rate
Heat from room temperature to 125 ℃ ≤30 minutes
Container size
240*165*180mm（W*D*H）
Observation window size
200*135mm
Observation window function
Equipped with an adjustable angle magnifying glass
Leak detection time setting
Can set timed alarms
Drain the oil
The container is equipped with an oil discharge port
Filtering function (optional)
It has a circulating filtration function that can filter out 1μm impurities in heavy fluorine oil
Configuration：
Name
Describe
Quantity
Oil heating system
/
1 set
Electrical control part
/
1 set
Heavy fluorine oil container
/
1
magnifier
Adjustable angle, 3x
1
Light bulb:
/
2
Retrieval device
1 size each
2
Heavy fluorine oil (optional)
import
5Kg
Packing & Delivery
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
Company Profile
Minder-Hightech is sales and service representative in semiconductor and electronic product industry equipment. The company is committed to providing customers with Superior, Reliable, and One-Stop Solutions for machinary equipment.
FAQ
1. About Price:
All of our prices are competitive and negotiable. The price varies depending on the configuration and customization complexity of your device.

2. About Sample:
We can provide sample production services for you, but you may provide some fees.

3. About Payment：
After the plan is confirmed, you need to pay us a deposit first, and the factory will start preparing the goods. After the
equipment is ready and you pay the balance, we will ship it.

4. About Delivery:
After the equipment manufacturing is completed, we will send you the acceptance video, and you can also come to the site to inspect the equipment.

5. Installation and Debugging:
After the equipment arrives at your factory, we can dispatch engineers to install and debug the equipment. We will provide you with a separate quotation for this service fee.

6. About Warranty:
Our equipment has a 12-month warranty period. After the warranty period, if any parts are damaged and need to be replaced, we will only charge the cost price.

More Products

Inquiry

Copyright © Guangzhou Minder-Hightech Co.,Ltd. All Rights Reserved

Privacy Policy

Inquiry Email WhatsApp WeChat
Top
×

Get in touch