Peranti semikonduktor pengedap ujian kebocoran mengesan MDNY-YHYD160 tekanan peralatan minyak Helium fluorin , China Peranti semikonduktor pengedap ujian kebocoran mengesan MDNY-YHYD160 tekanan peralatan minyak Helium fluorin Pengilang, pembekal, kilang- Guangzhou Minder-Hightech co., Ltd.

Penerangan Produk

MDNY-YHYD160 Pressure Helium Fluorine Oil equipment

MDNY-YHYD160 is an automated leak detection device specifically designed for fine and coarse inspection of electronic components such as semiconductor devices, integrated circuits, and electronic products.
The device is equipped with a PLC (Programmable Logic Controller), which can automatically control and operate the entire leak detection process, effectively preventing misoperation and improving leak detection efficiency.
And a photoelectric detection device is installed on the nitrogen tank of the equipment, which can monitor the oil level inside the nitrogen tank at any time.
This device has a high degree of automation and high reliability.
It can be used in conjunction with helium mass spectrometer leak detector and heavy fluorine oil heater to perform the entire fine and coarse inspection process of electronic components.

The MDNY-YHYD160 helium fluorine oil pressurization instrument, when combined with a heavy fluorine oil heating instrument and a helium mass spectrometer leak detector, can easily complete the leak detection requirements for electronic and semiconductor devices specified in GJB36A-96, GJB548-96A, and GJB128A-97 standards.

product semiconductor device sealing test leak detect mdny yhyd160 pressure helium fluorine oil equipment-47

Penerangan Prinsip

product semiconductor device sealing test leak detect mdny yhyd160 pressure helium fluorine oil equipment-48

Ciri-ciri:

PLC control, touch screen operation; Automatic control of liquid level height and display of process status;
Helium and fluorine oil are separated and operated independently, flexible and non interfering with each other;
Valves, pipelines, flanges, pressure tanks, and oil storage tanks are made of stainless steel;
The oil filter tank can filter out solid particles of 1 μ m, ensuring the cleanliness of fluorine oil.

spesifikasi

Main technical functions:

fungsi	Jelaskan	Nota
Mod paparan	skrin sentuh
Mod kawalan	PLC
Mechanical pump pumping speed	4L/s	Bipolar rotary vane vacuum pump
Dimensions of pressurized helium/pressurized fluorine oil tanks	F150×200（mm）	Saiz boleh disesuaikan
darjah vakum	≤45Pa
Helium filling pressure	0.2-0.6Mpa, adjustable
Masa menahan tekanan	1-10 hours, adjustable

konfigurasi

Nama	Jelaskan	Kuantiti
Pam mekanikal	4L/s	Sekeping 1
Pressurized helium tank	F150×200（mm）	Sekeping 1
Fluorine pressurized oil tank	F150×200（mm）	Sekeping 1
Tangki penyimpanan	F215×250mm	Sekeping 1
Injap solenoid	CKD/ASCO	1 set
Sensor tekanan	Mengukur	1 set
Meter aras cecair	HOARE	1 set
paip	HOARE	1 set
Sistem kawalan elektrik	HOARE	1 set
Light fluorine oil (optional)	Minder-Hightech	1 drum (20KG)

product semiconductor device sealing test leak detect mdny yhyd160 pressure helium fluorine oil equipment-49

Ciri-ciri:

The container has a certain depth to ensure that the distance between the inspected item and the liquid surface after immersion is greater than 50mm;
The inner surface has a non reflective black background; Equipped with a 3x magnifying glass and adjustable angle;
The light source installed on the instrument is sufficient and emits parallel light;
The illuminance inside the instrument is greater than 1.61 × 105lX, and the light source has no strong incident or reflected light on the observer;
The heating temperature is controllable and adjustable, and the time for placing leak detection reminders can be set.

Keterangan:

stipulates that particles larger than 1 μm are not allowed in high boiling point fluorine oil (FC43). However, in actual leak detection, due to the influence of the tested object and environmental factors, some impurities will gradually
accumulate in the oil, increasing the turbidity of the fluorine oil and making it difficult to observe. Therefore, heavy fluorine
oil should be filtered regularly, and the heavy fluorine oil container is equipped with a drain port, which can conveniently store heavy fluorine oil. Heavy fluorine oil can be stored in a pot after natural cooling to reduce waste caused by natural
volatilization.

Fungsi penunjuk:

Julat suhu kerja	125 ℃ ± 5 ℃
kadar pemanasan	Heat from room temperature to 125 ℃ ≤30 minutes
Saiz bekas	240165180mm（WDH）
Observation window size	200 * 135mm
Observation window function	Equipped with an adjustable angle magnifying glass
Leak detection time setting	Can set timed alarms
Toskan minyak	The container is equipped with an oil discharge port
Filtering function (optional)	It has a circulating filtration function that can filter out 1μm impurities in heavy fluorine oil

Konfigurasi：

Nama	Jelaskan	Kuantiti
Sistem pemanasan minyak	/	1 set
Bahagian kawalan elektrik	/	1 set
Heavy fluorine oil container	/	1
pembesar	Adjustable angle, 3x	1
Mentol:	/	2
Retrieval device	1 size each	2
Heavy fluorine oil (optional)	mengimport	5Kg

Pembungkusan & Penghantaran

product semiconductor device sealing test leak detect mdny yhyd160 pressure helium fluorine oil equipment-50

product semiconductor device sealing test leak detect mdny yhyd160 pressure helium fluorine oil equipment-51

Untuk memastikan keselamatan barang anda dengan lebih baik, perkhidmatan pembungkusan profesional, mesra alam, mudah dan cekap akan diberikan.

Profil Syarikat

Minder-Hightech ialah wakil jualan dan perkhidmatan dalam peralatan industri semikonduktor dan produk elektronik. Syarikat komited untuk menyediakan pelanggan dengan Penyelesaian Unggul, Boleh Dipercayai dan Sehenti untuk peralatan jentera.

Soalan Lazim

1. Mengenai Harga:
Semua harga kami kompetitif dan boleh dirunding. Harga berbeza-beza bergantung pada konfigurasi dan kerumitan penyesuaian peranti anda.

2. Mengenai Sampel:
Kami boleh menyediakan perkhidmatan pengeluaran sampel untuk anda, tetapi anda mungkin memberikan beberapa bayaran.

3. Mengenai Pembayaran：
Selepas pelan disahkan, anda perlu membayar deposit kepada kami terlebih dahulu, dan kilang akan mula menyediakan barangan. Selepas
peralatan sudah siap dan anda membayar baki, kami akan menghantarnya.

4. Mengenai Penghantaran:
Selepas pembuatan peralatan selesai, kami akan menghantar video penerimaan kepada anda, dan anda juga boleh datang ke tapak untuk memeriksa peralatan.

5. Pemasangan dan Nyahpepijat:
Selepas peralatan tiba di kilang anda, kami boleh menghantar jurutera untuk memasang dan nyahpepijat peralatan. Kami akan memberikan anda sebut harga yang berasingan untuk yuran perkhidmatan ini.

6. Mengenai Waranti:
Peralatan kami mempunyai tempoh jaminan selama 12 bulan. Selepas tempoh jaminan, jika ada bahagian yang rosak dan perlu diganti, kami hanya akan mengenakan harga kos.