Halfgeleider Geïntegreerde schakelingen Elektronische producten Lek Detector Heliumfluorolie Apparatuur He & Fluor Charge Platform , China Halfgeleider Geïntegreerde schakelingen Elektronische producten Lek Detector Heliumfluorolie Apparatuur He & Fluor Charge Platform Fabrikanten, Leveranciers, Fabriek- Guangzhou Minder-Hightech Co.,Ltd.

Productomschrijving

He & Fluorine Charge Platform

Our company's MDNY-YAYD160 series helium/fluorine oil pressure equipment, combined with helium mass spectrometer leak detector and heavy fluorine oil heating leak detector, is an automated helium/fluorine oil pressure equipment designed for fine and coarse inspection of electronic components such as integrated circuits, semiconductor devices, and electronic products.
Fluorine oil/helium gas has excellent dielectric properties, chemical inertness, electrical insulation, and high and low
temperature resistance. It is non corrosive to electronic components and does not affect their various parameters. Make it an ideal leak detection medium for electronic component leak testing.
The principle of helium pressurization fine inspection: First, place the original device in a sealed container that can be
pressurized, and pressurize the component with helium for a certain period of time. If there is a leak in the component, helium gas is forced into the inner cavity. Then remove the tested component and place it in the detection box of the helium mass spectrometer leak detector for vacuum leak detection. If there is a leak in the component, the helium gas entering its inner cavity will overflow into the leak detector, and the leak detector will display the leakage rate.
The principle of fluorine oil leak detection method is that the molecules of the leak detection medium are small, so even small leaks can pass through. If there are leaks in the device, light fluorine oil/helium gas will enter the device under pressure during pressurization. Due to the boiling point temperature of light fluorine oil being about 45.7 ℃, when placed in heavy fluorine oil at a temperature of 125 ℃, the light fluorine oil quickly vaporizes, causing a rapid increase in pressure inside the component cavity. The gas inside the cavity will emerge from the leak, resulting in the appearance of bubbles in high boiling fluorine oil.
All valve bodies of this equipment are controlled by electric ball valves, which can be operated with one click through a PLC based control system. And equipped with a touch screen, it can constantly observe the pressure and liquid level inside the pressurized fluorine oil/helium tank.
This device has a compact overall structure, is easy to move, is easy to operate, has high detection efficiency, and is long-term safe and reliable. The appearance of the equipment is shown in the diagram:

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-56

Specificaties

Spanning/vermogen	220V / 1100W
Werk druk	600kpa ± 20kpa
Fluorine oil tank capacity	8.5L
Fluorine/helium tank capacity	12 L
Afmetingen	1080 * 720 * 1422mm (lengte * breedte * hoogte)
Gewicht van de apparatuur	230KG

Algemene structuur van de apparatuur

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-57

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-58

Elektrische interface:

On the left side of the device is the circuit part, which is distributed in sequence with the main power socket, grounding pole, and main power switch. On the right side of the equipment is the gas path section, which is sequentially distributed with helium interface, nitrogen interface, and exhaust interface. After the device is in place, plug in the corresponding power connector and connect the corresponding air circuit as shown in the figure.

Pressure helium/fluorine oil tank:

The overall material is made of stainless steel, with four locking mechanisms evenly distributed on the main body of the can. The can lid is welded with a stainless steel handle, making it easy for people to flip the lid. When the lid is flipped over, it can be kept at a safe angle. Before pressurizing helium/fluorine oil, use a locking mechanism to lock the tank cover. The top of the locking mechanism is equipped with a five-star handle nut for easy locking by people.

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-59

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-60

Fluorine oil tank

The main body of the tank is made of stainless steel material, and the bottom is equipped with an oil drain valve. After using the fluorine oil in the tank for a period of time, the drain valve can be opened to discharge the fluorine oil from the tank, and then the fluorine oil can be filtered and re injected. (Fluorine oil can be injected from the pressurized helium/fluorine oil tank above)

Systeemstatusinterface

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-61

Verpakking en levering

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-62

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-63

Bedrijfsprofiel

Minder-Hightech is een sales- en servicevertegenwoordiger in halfgeleider- en elektronische productindustrie-apparatuur. Het bedrijf streeft ernaar klanten superieure, betrouwbare en one-stop-oplossingen te bieden voor machinale apparatuur.

FAQ

1. Over de prijs:
Al onze prijzen zijn concurrerend en onderhandelbaar. De prijs varieert afhankelijk van de configuratie en de complexiteit van de aanpassing van uw apparaat.

2. Over het voorbeeld:
Wij kunnen voor u monsterproductie verzorgen, maar hiervoor brengen wij mogelijk wel kosten in rekening.

3. Over betaling:
Nadat het plan is bevestigd, moet u ons eerst een aanbetaling doen en de fabriek zal beginnen met het voorbereiden van de goederen. Nadat de
Als de apparatuur klaar is en u het resterende bedrag betaalt, verzenden wij het.

4. Over levering:
Nadat de productie van de apparatuur is afgerond, sturen wij u de acceptatievideo. U kunt ook ter plaatse langskomen om de apparatuur te inspecteren.

5. Installatie en debuggen:
Nadat de apparatuur bij uw fabriek is aangekomen, kunnen we technici sturen om de apparatuur te installeren en te debuggen. We zullen u een aparte offerte voor deze servicekosten verstrekken.

6. Over garantie:
Onze apparatuur heeft een garantieperiode van 12 maanden. Als er na de garantieperiode onderdelen beschadigd zijn en vervangen moeten worden, brengen wij alleen de kostprijs in rekening.