Semiconductor Integrated circuits Electronic products Leak Detector Helium fluorine oil Equipment He & Fluorine Charge Platform , China Semiconductor Integrated circuits Electronic products Leak Detector Helium fluorine oil Equipment He & Fluorine Charge Platform Manufacturers, Suppliers, Factory

Опис производа

He & Fluorine Charge Platform

Our company's MDNY-YAYD160 series helium/fluorine oil pressure equipment, combined with helium mass spectrometer leak detector and heavy fluorine oil heating leak detector, is an automated helium/fluorine oil pressure equipment designed for fine and coarse inspection of electronic components such as integrated circuits, semiconductor devices, and electronic products.
Fluorine oil/helium gas has excellent dielectric properties, chemical inertness, electrical insulation, and high and low
temperature resistance. It is non corrosive to electronic components and does not affect their various parameters. Make it an ideal leak detection medium for electronic component leak testing.
The principle of helium pressurization fine inspection: First, place the original device in a sealed container that can be
pressurized, and pressurize the component with helium for a certain period of time. If there is a leak in the component, helium gas is forced into the inner cavity. Then remove the tested component and place it in the detection box of the helium mass spectrometer leak detector for vacuum leak detection. If there is a leak in the component, the helium gas entering its inner cavity will overflow into the leak detector, and the leak detector will display the leakage rate.
The principle of fluorine oil leak detection method is that the molecules of the leak detection medium are small, so even small leaks can pass through. If there are leaks in the device, light fluorine oil/helium gas will enter the device under pressure during pressurization. Due to the boiling point temperature of light fluorine oil being about 45.7 ℃, when placed in heavy fluorine oil at a temperature of 125 ℃, the light fluorine oil quickly vaporizes, causing a rapid increase in pressure inside the component cavity. The gas inside the cavity will emerge from the leak, resulting in the appearance of bubbles in high boiling fluorine oil.
All valve bodies of this equipment are controlled by electric ball valves, which can be operated with one click through a PLC based control system. And equipped with a touch screen, it can constantly observe the pressure and liquid level inside the pressurized fluorine oil/helium tank.
This device has a compact overall structure, is easy to move, is easy to operate, has high detection efficiency, and is long-term safe and reliable. The appearance of the equipment is shown in the diagram:

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-56

Спецификација

Напон/снага	КСНУМКСВ / КСНУМКСВ
Радни притисак	600kpa ± 20kpa
Fluorine oil tank capacity	КСНУМКСЛ
Fluorine/helium tank capacity	КСНУМКС Л
Димензије	1080 * 720 * 1422mm (length * width * height)
Тежина опреме	КСНУМКСКГ

Укупна структура опреме

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-57

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-58

Електрични интерфејс:

On the left side of the device is the circuit part, which is distributed in sequence with the main power socket, grounding pole, and main power switch. On the right side of the equipment is the gas path section, which is sequentially distributed with helium interface, nitrogen interface, and exhaust interface. After the device is in place, plug in the corresponding power connector and connect the corresponding air circuit as shown in the figure.

Pressure helium/fluorine oil tank:

The overall material is made of stainless steel, with four locking mechanisms evenly distributed on the main body of the can. The can lid is welded with a stainless steel handle, making it easy for people to flip the lid. When the lid is flipped over, it can be kept at a safe angle. Before pressurizing helium/fluorine oil, use a locking mechanism to lock the tank cover. The top of the locking mechanism is equipped with a five-star handle nut for easy locking by people.

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-59

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-60

Fluorine oil tank

The main body of the tank is made of stainless steel material, and the bottom is equipped with an oil drain valve. After using the fluorine oil in the tank for a period of time, the drain valve can be opened to discharge the fluorine oil from the tank, and then the fluorine oil can be filtered and re injected. (Fluorine oil can be injected from the pressurized helium/fluorine oil tank above)

Интерфејс статуса система

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-61

Паковање и достава

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-62

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-63

профил компаније

Миндер-Хигхтецх је представник продаје и сервиса у области опреме за полупроводничке и електронске производе. Компанија је посвећена томе да купцима пружи врхунска, поуздана решења на једном месту за машинску опрему.

Питања

1. О цени:
Све наше цене су конкурентне и могу се преговарати. Цена варира у зависности од конфигурације и сложености прилагођавања вашег уређаја.

2. О узорку:
Можемо да вам пружимо услуге производње узорака, али можете обезбедити неке накнаде.

3. О плаћању:
Након што је план потврђен, потребно је прво да нам уплатите депозит, а фабрика ће почети да припрема робу. Након што је
опрема је спремна и ви платите остатак, ми ћемо га послати.

4. О испоруци:
Након што је производња опреме завршена, послаћемо вам видео пријем, а можете доћи и на локацију да прегледате опрему.

5. Инсталација и отклањање грешака:
Након што опрема стигне у вашу фабрику, можемо послати инжењере да инсталирају и отклоне грешке на опреми. Даћемо вам посебну понуду за ову услугу.

6. О гаранцији:
Наша опрема има гарантни рок од 12 месеци. Након гарантног рока, ако су неки делови оштећени и треба их заменити, ми ћемо наплатити само цену коштања.