Semiconductor Circuite Integrate Platformă , China. Semiconductor Circuite Integrate Platformă Producători, Furnizori, Fabrică Prin urmare, Comisia a adoptat o listă de informații în temeiul articolului 107 alineatul (1) din Regulamentul (CE) nr.

descrierea produsului

He & Fluorine Charge Platform

Our company's MDNY-YAYD160 series helium/fluorine oil pressure equipment, combined with helium mass spectrometer leak detector and heavy fluorine oil heating leak detector, is an automated helium/fluorine oil pressure equipment designed for fine and coarse inspection of electronic components such as integrated circuits, semiconductor devices, and electronic products.
Fluorine oil/helium gas has excellent dielectric properties, chemical inertness, electrical insulation, and high and low
temperature resistance. It is non corrosive to electronic components and does not affect their various parameters. Make it an ideal leak detection medium for electronic component leak testing.
The principle of helium pressurization fine inspection: First, place the original device in a sealed container that can be
pressurized, and pressurize the component with helium for a certain period of time. If there is a leak in the component, helium gas is forced into the inner cavity. Then remove the tested component and place it in the detection box of the helium mass spectrometer leak detector for vacuum leak detection. If there is a leak in the component, the helium gas entering its inner cavity will overflow into the leak detector, and the leak detector will display the leakage rate.
The principle of fluorine oil leak detection method is that the molecules of the leak detection medium are small, so even small leaks can pass through. If there are leaks in the device, light fluorine oil/helium gas will enter the device under pressure during pressurization. Due to the boiling point temperature of light fluorine oil being about 45.7 ℃, when placed in heavy fluorine oil at a temperature of 125 ℃, the light fluorine oil quickly vaporizes, causing a rapid increase in pressure inside the component cavity. The gas inside the cavity will emerge from the leak, resulting in the appearance of bubbles in high boiling fluorine oil.
All valve bodies of this equipment are controlled by electric ball valves, which can be operated with one click through a PLC based control system. And equipped with a touch screen, it can constantly observe the pressure and liquid level inside the pressurized fluorine oil/helium tank.
This device has a compact overall structure, is easy to move, is easy to operate, has high detection efficiency, and is long-term safe and reliable. The appearance of the equipment is shown in the diagram:

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-56

Specificație

Tensiune/putere	220V / 1100W
Presiunea de lucru	600kpa ± 20kpa
Fluorine oil tank capacity	8.5L
Fluorine/helium tank capacity	12
Dimensiuni	1080 * 720 * 1422 mm (lungime * lățime * înălțime)
Greutatea echipamentului	230KG

Structura generală a echipamentului

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-57

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-58

Interfata electrica:

On the left side of the device is the circuit part, which is distributed in sequence with the main power socket, grounding pole, and main power switch. On the right side of the equipment is the gas path section, which is sequentially distributed with helium interface, nitrogen interface, and exhaust interface. After the device is in place, plug in the corresponding power connector and connect the corresponding air circuit as shown in the figure.

Pressure helium/fluorine oil tank:

The overall material is made of stainless steel, with four locking mechanisms evenly distributed on the main body of the can. The can lid is welded with a stainless steel handle, making it easy for people to flip the lid. When the lid is flipped over, it can be kept at a safe angle. Before pressurizing helium/fluorine oil, use a locking mechanism to lock the tank cover. The top of the locking mechanism is equipped with a five-star handle nut for easy locking by people.

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-59

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-60

Fluorine oil tank

The main body of the tank is made of stainless steel material, and the bottom is equipped with an oil drain valve. After using the fluorine oil in the tank for a period of time, the drain valve can be opened to discharge the fluorine oil from the tank, and then the fluorine oil can be filtered and re injected. (Fluorine oil can be injected from the pressurized helium/fluorine oil tank above)

Interfața de stare a sistemului

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-61

Ambalare și livrare

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-62

product semiconductor integrated circuits electronic products leak detector helium fluorine oil equipment he fluorine charge platform-63

Profilul companiei

Minder-Hightech este reprezentant de vânzări și service în echipamentele din industria semiconductoarelor și a produselor electronice. Compania se angajează să ofere clienților soluții superioare, fiabile și unice pentru echipamentele de mașini.

Întrebări Frecvente

1. Despre preț:
Toate prețurile noastre sunt competitive și negociabile. Prețul variază în funcție de configurația și complexitatea personalizării dispozitivului dvs.

2. Despre eșantion:
Vă putem oferi servicii de producție de mostre, dar este posibil să furnizați unele taxe.

3. Despre plată:
După ce planul este confirmat, trebuie să ne plătiți mai întâi un depozit, iar fabrica va începe să pregătească mărfurile. După
echipamentul este gata și plătiți soldul, îl vom expedia.

4. Despre livrare:
După ce fabricarea echipamentului este finalizată, vă vom trimite videoclipul de acceptare și puteți veni și la șantier pentru a inspecta echipamentul.

5. Instalare și depanare:
După ce echipamentul ajunge la fabrica dumneavoastră, putem trimite ingineri să instaleze și să depaneze echipamentul. Vă vom furniza o cotație separată pentru această taxă de serviciu.

6. Despre garanție:
Echipamentul nostru are o perioadă de garanție de 12 luni. După perioada de garanție, dacă vreo piesă este deteriorată și trebuie înlocuită, vom percepe doar prețul de cost.